Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes
  • Show More Model Years
  • Show Fewer Model Years

Wheels

$140.00
This 11-speed freehub is only compatible with model-year 2013 (V8) and 2014 (V9) Zipp wheelsets. Check that your hub has a black end cap before using this freehub. Use the spacer for compatibility with 10-speed Shimano and SRAM drivetrains after installation. The red freehub is designed for SRAM or Shimano drivetrains and includes a spacer for 10-speed compatibility. The blue freehub is designed for Campagnolo drivetrains. The Campagnolo version requires one 0.25mm axle washer, which is included. - 10 to 11-speed wheel conversion can only be completed by an authorized Zipp Service Center - Not intended to convert older 10-speed freehub wheels to 11-speed freehub wheels - Only intended to swap freehub compatibility (SRAM/Shimano - Campagnolo) with current 11-speed wheels - Includes cassette spacer - Material: Aluminum
$975.00 - $1,050.00
Zipp's 303 Firecrest Tubeless wheels are designed for the real world—a world of imperfect conditions, varying road surfaces, and elements where the bottom line is simple: efficiency = speed. They're faster, lighter, and more capable over varied terrain—whether the surface is pavement in all its conditions or no pavement at all. Deeply rooted in Zipp's drive to conquer the Spring Classics, the new 303 Firecrest is remade with a purpose-made approach for the demands of modern road bikes. When it comes to going fast on a bicycle, efficiency means reduced wind resistance, rolling resistance, rider fatigue, and weight. The 303 Firecrest Tubeless Disc-brake was designed using real-world direct measurements (vs. primarily wind tunnel or computer simulation). The results were huge. Its rim is slightly more bulbous in design than its predecessor, with a 32mm outside width, a 25mm internal width, and a 40mm rim depth. The profile provides low drag and an improved transition between rim and tire, boosting aero efficiency on the road. The wide rim stance also features less tire deflection for reduced rolling resistance. The combination of the wider tire, increased tire volume, and lower tire pressure helps to reduce rider fatigue by smoothing out the ride over imperfect pavement and road conditions—the tire and wheel system absorbs the shaking, not the rider. At the center of the 303 Firecrest Tubeless is a versatile and durable new hubset, the German-engineered ZR1 DB. This hubset features 66 points of engagement for quicker response. The 303 Firecrest Tubeless wheels are for dedicated cyclists who aspire to the latest in technology. They're for those who compete in races, against peers, or simply to conquer personal limits. - New Zipp graphics and cosmetic identity that scream speed - Versatile endurance wheelset for the modern road bike with tubeless and hookless rim profile - Lighter weight than its predecessor, making it nimble and fast - Tubeless Made Easy, optimized tire bed sign allows for simple tool-free installation and removal with no need for an air compressor to seat the tire. - Ultra-wide 25mm rim profile creates a better tire interface to be fast on or off the road - 40mm rim depth makes a light and aero wheel in every situation - Ships with 12mm end caps - Center Lock rotor interface (lockring included)
$727.00
Zipp's 303 S Tubeless Disc Brake wheelset provides today's cyclists the versatility they demand with the speed they crave. Expanding greatly on its heritage of conquering the Spring Classics, this 303 wheelset maintains its ideal-for-every-terrain 45mm rim depth but adds a significantly wider internal width to provide greater performance and ride quality in almost every measurable way. This wheelset is tubeless for disc-brake bikes, allowing the ability to run wide tires at lower pressures for race-ready speed on or off the pavement. The 303 S is among our lightest wheelsets, optimized for top aero performance with a 28mm tire but capable of handling gravel tires up to 50mm wide. - Wide rims optimize tire profile to allow lower tire pressure, especially with tubeless. The result is a larger contact patch for increased grip and confident cornering, descending, and handling in wet conditions. - Lower tire pressures and larger volume provides a compliant ride with fewer vibrations. - Significant watt savings when running larger tires at lower pressure. - Wide, hookless rims create a seamless transition to the tire, reducing drag. - Fastest with 28mm, but fits wide gravel tires as well - New Zipp graphics and cosmetic identity that scream speed
$976.00
- Versatile aero wheelset for the modern road bike with tubeless and hookless rim profile - Optimized tire bed for easy tire installation - Wide 23mm rim profile creates a better tire interface to be fast on or off the road - New ZR1 DB hub is engineered in Germany with better seal design for improved durability and quicker response with 66 points of engagement - Ships with 12mm front and rear end caps - Center locking rotor interface. Lockring is included with the wheels - 1470g - Lifetime warranty
$1,029.00
- Versatile aero wheelset for the modern road bike with tubeless and hookless rim profile - Optimized tire bed for easy tire installation - Wide 23mm rim profile creates a better tire interface to be fast on or off the road - New ZR1 DB hub is engineered in Germany with better seal design for improved durability and quicker response with 66 points of engagement - Ships with 12mm front and rear end caps - Center locking rotor interface. Lockring is included with the wheels - 1470g - Lifetime warranty
$2,400.00
With the introduction of the radical biomimicry-derived 454 NSW Carbon Clincher, Zipp proved that aero efficiency and crosswind stability are not mutually exclusive aero wheel design goals. Using a similar Sawtooth rim design, the 858 NSW wheelset goes 24 millimeters deeper than the 454 and delivers even greater gains in aero efficiency while providing a level of rider control in crosswinds that was previously unthinkable with conventional deep-section wheel designs. By eliminating concerns over control, the 858 NSW ushers in a new era where aerodynamically efficient deep-section wheels are no longer a race-day-only option—they’re everyday wheels. Adding to the 858’s versatility, its lightweight and laterally stiff rim imparts a level of responsiveness previously only attributed to much shallower wheels, keeping bike handling lively and quick. The 858 delivers the best braking available thanks to Zipp's NSW-exclusive Showstopper brake track found on the rim brake version of the 858 NSW. Designed for road or triathlon applications, the 858 NSW’s advanced aero efficiency, crosswind stability, responsive handling, and unrivaled braking are engineered to make what was once impossible…possible. - Sawtooth rim with Hyperfoil nodes - Rim depth of 77/82mm - Cognition hubset - Axial Clutch technology - ImPress graphics - HexFin ABLC dimple pattern - ShowStopper - AeroBalance - Handcrafted in the USA
$7.00 - $7.95
Package comes with two pieces of rim tape for use with the Zipp clinchers. Woven nylon material. Tape is extra thin with a thickness of 0.5 mm. Note: For Zipp 700c and 650c aluminum/carbon hybrid clichers, use the 16 mm rim tape. For Zipp 30 wheel set use 18mm but for the wider Firecrest and Firestrike carbon clinchers use the 20mm x 1/2mm rim tape.
$116.30 - $143.00
Freehub bodies for Zipp Cognition hubs.
$108.00
Wheel Freehub Kit SS 176/177 SRAM XDR - End Caps Not Included Compatible With: WH-202-CCR-A1, WH-202-TLD-A1, WH-202-TUD-A1, WH-302-CCD-A1, WH-302-CCR-A1, WH-302-TLR-A1, WH-303-CCR-B1, WH-303-TLD-A1, WH-303-TUD-B1, WH-303-TUR-B1, WH-30C-CLD-A1, WH-30C-CLR-A1, WH-404-CCR-A1, WH-404-CCR-B1, WH-404-TLD-A1, WH-808-CCR-B1, WH-808-TLD-A1, WH-SP9-CC30-A1, WH-SP9-CCD-A1, WH-SP9-CCR-A1, WH-SP9-TUD-A1
$4.95 - $22.22
- Replacement straight pull spokes for Zipp 88 (Front) and 188 (Rear) Hubs
$2,905.00
How do you make super better? Make it tubeless. Zipp’s go-to triathlon and time trial weapon, the Super-9 Tubeless rim-brake wheel is now tubeless ready with a 18mm internal width. That means you can lower tire pressure for a host of benefits: better cornering grip, better compliance, and reduced rolling resistance. With tubeless, you get all this without the risk of pinch flats. So, go attack the course. The Super-9 gives you the technology needed to do your best. The Super-9 Carbon Clincher optimizes supreme aerodynamics, power transfer, stiffness, lightweight and durability. - Zipp graphics and cosmetic identity that screams speed applied with our ImPress direct-print technology - 18mm internal width and tubeless compatibility for optimization of wider tires with lower tire pressure, lower rolling resistance, and increase grip and compliance - Aero, durable, light weight - XDR or SRAM/Shimano driver bodies - Ships with quick release skewer - Campagnolo driver body sold separately
$7.00
Zipp Speed Weaponry Valve Extender Wrench Set - Two 4 mm and 5 mm combination wrenches - Replacement wrenches required to properly install Zipp integrated valve extenders - Use with Zipp Tangente tubes with aluminum Presta valve and aluminum valve extender
$39.99
Boostinator kits allow non-boost wheels to be mounted in Boost spacing frames and forks. While incremental, the benefits of the "Boost" 15x110mm front and 12x148mm rear axle standards are clear: better clearance for fatter tires & rims and reduced dish for stiffer, stronger wheels. The big bummer? Taking full advantage requires not only a new frame and fork, but new wheels as well. In response, we have developed the Boostinator. When paired with compatible 15x100mm or 12x142mm hubs, Boostinator kits allow existing wheels to be mounted in Boost-standard frames and forks. Disc and drivetrain positions are maintained and, thanks to a quick re-dish, spoke bracing angles are improved. Boostinator kits consist of a specially-designed axle end cap and, in the case of rear kits, a precision-machined rotor spacer with a set of six high-strength bolts. In keeping with Boost specifications, the disc and cassette are shifted outboard, allowing brakes and derailleurs to function as designed. Compatibility: - Front boostinators are only an endcap and do not require a rotor spacer. The wheel is re-dished. - Rear boostinators require both a re-dish and rotor spacer. - Rear Boostinator kits are not approved for rotors larger than 183mm. - Hubs spacing is 100mm front and 142 rear, and the Boostinators make them 110 and 148 respectively. - Compatible with 6-bolt FRONT wheels and SOME centerlock models. - Compatible with ONLY 6-bolt REAR wheels (there is no way to space centerlock rotors over 6mm). - NOT recommend (or safe) for non-symmetric lacing like the 2:1 lacing found on some of Industry Nine's wheels. *Note: You will need to re-dish your wheel after installing any Boosinator. Boostinator DR: - The Boostinator DR is compatible with DT-Swiss 12x142mm Star Ratchet (240- and 350-series) rear hubs with 6-bolt (IS) rotor mounts. - Centerlock hubs are not supported. - 180- and 190-series hubs are Centerlock only. - The Boostinator DR is also compatible with some complete wheels from DT Swiss, Roval (Specialized), Giant, Syncros (Scott), and others that use DT's Star Ratchet internals. - Remove the disc side end cap. Bearing size 6802 15x24. - Net weight: 18g Boostinator HR: - The Boostinator HR is compatible with 12x142mm Hope Pro 2 EVO and Pro 4 rear hubs. - Non-EVO Pro 2 hubs are not supported - Net weight: 18g Boostinator 9TR: - Compatible with 142x12 rear Industry Nine Torch hubs. - Not compatible with 2:1 lacing wheels from Industry Nine - Not compatible with Centerlock hubs Tech Specs: - Material: 6061 aluminum - Included: Rear kits come with appropriate-length Class 10.9 bolts, each roughly 40% stronger than more common Class 8.8 hardware.
$40.00
Ultra-light, bolt-on thru-axles, with a low-profile 6mm head for use on Whisky forks and others. They are also available in some common rear frame sizes. See manufacturer's specifications for fitment questions. - Thread Length: 12mm
$4.00 - $16.50
Whisky Parts Co. Tubeless Rim Tape.
$2.50
- Cold forged 2.0mm 304 stainless steel with rolled threads - Nipples sold separately - 213g (32 spokes @ 262mm) - Bag of 50
$40.00
Wheels Mfg axles are made from aircraft quality 4130 alloy steel, made specifically for Wheels Mfg. It’s heat-treated to increase strength without making the axle brittle. Rolled threads make for easy assembly of cones & locknuts. - Fits many Shimano / Japanese rear hubs with 130mm spacing - Type: Hollow Axle - Threads: 10mm x 1 - Diameter: 10mm - Length: 141mm - 1 axle per bag
$40.00
Wheels Mfg axles are made from aircraft quality 4130 alloy steel, made specifically for Wheels Mfg. It’s heat-treated to increase strength without making the axle brittle. Rolled threads make for easy assembly of cones & locknuts. - Fits Campagnolo / Italian rear hubs with 130mm spacing - Type: Hollow Axle - Threads: 10mm x 26tpi - Diameter: 10mm - Length: 141mm - 1 axle per bag
$40.00
Wheels Mfg axles are made from aircraft quality 4130 alloy steel, made specifically for Wheels Mfg. It’s heat-treated to increase strength without making the axle brittle. Rolled threads make for easy assembly of cones & locknuts. - Fits many Taiwanese hubs with 135mm spacing - Type: Hollow Axle - Threads: 9.5mm x 26tpi - Diameter: 9.5mm - Length: 146mm - 1 axle per bag
$40.00
Wheels Mfg axles are made from aircraft quality 4130 alloy steel, made specifically for Wheels Mfg. It’s heat-treated to increase strength without making the axle brittle. Rolled threads make for easy assembly of cones & locknuts. - Fits many Shimano / Japanese front hubs - Type: Solid Axle - Threads: 9mm x 1 - Diameter: 9mm - Length: 155mm - 1 axle per bag
$40.00
Wheels Mfg axles are made from aircraft quality 4130 alloy steel, made specifically for Wheels Mfg. It’s heat-treated to increase strength without making the axle brittle. Rolled threads make for easy assembly of cones & locknuts. - Fits many BMX hubs - Type: Solid Axle - Threads: 9.5mm x 24tpi - Diameter: 9.5mm - Length: 180mm - 1 axle per bag
$2.09 - $7.35
Wheels Manufacturing Outer Axle Nuts are high-grade steel nuts that provide secure wheel fixing for solid-axle wheels. - 14mm x 1mm (1411-AN) sold in pairs - All others sold individually
$99.95 - $114.95
Built for bashing, whether on a gravity shred sled or fully loaded bikepacking rig, WTB's KOM Tough rims are extruded from top-tier alloy to provide utmost durability at a reasonable weight. Their legendary I-Beam construction has evolved to further reinforce the rim with dual support beams that provide increased strength and stiffness for the world’s most aggressive riders. KOM Tough rims are proven on the toughest tracks of the Enduro World Series, depended on for daily trail rides, and trusted while bikepacking in remote regions of the world. Features: - TCS 2.0 creates a more robust, easily installed and dependable tubeless system. - A recessed channel along the center of TCS 2.0 rims allows installation of the all-new Solid Strip, which prevents tubeless tape from sagging at the spoke holes and results in a smooth, consistent interface between the tire and rim. - 4D angled spoke drilling eliminates binding and lateral loading, and disperses tension more evenly over a greater area.
$74.00
Replacement Shimano/SRAM freehub body for Stan's NoTubes 3.30 rear hubs.
$24.00 - $26.95
Stan's lightweight aluminum valve stems are half the weight of Stan's standard brass valves. The secure round base is compatible with most tubeless rims and a perfect fit for all Stan's BST rims. A removable valve core makes adding sealant easy, and these babies fit up to 8mm valve hole. Sold as a pair.
$68.95
Going tubeless allows you to run low tire pressure for better traction while drastically reducing the chances of a flat. Cross Country 29er Tubeless Kit converts standard tubed wheels to tubeless so you can reap the benefits. Everything you need to go tubeless is included. Plus, you won't miss dealing with flat tires and you'll save money on tubes!
$11.49 - $25.00
Can be used with Stan's ZTR rims to make them airtight or used as a lightweight rim tape in any rim. A single 10-yard roll will tape five 26-inch rims or four 29-inch rims or two wide road clincher rims. 21mm width fits: - ZTR Olympic - ZTR Iron Cross - ZTR 355 - ZTR Alpine - ZTR Crest - ZTR Alpha 340 (2 layers) - ZTR Alpha 400 (2 layers) - Most road clincher rims 25mm width fits: - ZTR 355 (26", 650b, 29") - ZTR Crest - Crest MK3 - ZTR Arch EX - ZTR Flow EX - Crest S1 27mm width fits: - ZTR Flow EX - ZTR Bravo - ZTR Hugo 52mm - Arch S1 - ZTR Rapid 28 - ZTR Rapid 30 - Arch MK3 30mm width fits: - ZTR Flow MK3
$17.60
The same spoke thread treatment used by Stan's pro wheel builders is now available to everyone. Stan's SRD Spoke Powder fills the threads of the spoke and functions as both a lubricant during assembly and a thread lock once built. Each bottle contains 24g (.8oz) which will treat approximately 300 wheels. The PTFE powder in Stan's SRD Spoke Powder acts as a barrier, keeping the metal of the nipple from bonding to the metal of the spoke and preventing spoke wind up during build or adjustment. In promoting a smoother turning nipple, the powder also ensures more accurate and consistent wheel builds, with less “ping and pop" during and after the build. The powder also fills the threads of the spoke to act as a thread lock that prevents loosening and de-tensioning and is particularly well suited for mechanically locking nipples such as Sapim's Secure Lock. - Improves tension consistency and overall build quality - Prevents spoke wind up - Offers secure thread lock between spoke and nipple - Prevents corrosion between spoke and nipple - Can be used dry or as a slurry - Works great with mechanically locking nipples
$18.00
Use Stan's Tubeless Valve Stems when you're converting standard rims to tubeless via the taping method. These also have a removable core for easier application of tire sealant. Note: Schrader valve is for non-stepped Hugo rims. If your Hugo rim decal reads: - MAX RIM PRESSURE: 2.8 tires: 26psi, 3.0 tires: 24psi - ERD 615, 622x49.9, 29 in x 52.3mm Your rim has a stepped valve and is not compatible with this Schrader valve.
$46.49
Sta Tru Front Wheel - Measures 9-inch across, uses a 12-inch tire - Single Wall Rim - Hub/Brake Compatibility: Rim Brake - ISO Diameter: 203 / 12.5-inch - Front Axle: 5/16-inch x 85mm - Rim Width (Internal): 24 mm - Tire Type: Clincher
$69.99
Sta Tru Rear Wheel - Hub/Brake Compatibility: Coaster Brake - Wheel Size: 16-inch - Cassette Body Type: Threaded Standard 1.37-inch x 24tpi - ISO Diameter: 305 / 16-inch - Valve: Schrader - Tire Type: Clincher - Rear Axle: 3/8-inch Threaded x 110mm
$58.99 - $65.49
Sta Tru Front Wheel - Single Wall rim - Hub/Brake Compatibility: Rim Brake - Wheel Size: 20-inch - ISO Diameter: 406 / 20-inch BMX - Front Axle: 3/8-inch x 100mm - Valve: Schrader - Tire Type: Clincher
$95.00 - $114.99
- An ultra-wide, high performance alloy rim, weight optimized for Enduro, Trail and All Mountain use - Tubeless ready with anti-burp rim hooks to prevent the loss of pressure and keep tires firmly in place - 32 holes with an inner width of 35mm and outer width of 39.5mm provides ultra-wide support for Plus-Size and high volume tires - The corrugated rim center, a brand acclaimed technology, adds exceptional strength, making it more rigid and allowing the rim to be wider without adding material - Shotpeen finish to increase fatigue life and make it more durable - MGR Dynamal Alloy
$969.99
The all-rounder of the new DURA-ACE wheel lineup, the C50 is both lighter than the previous C40 model and nearly as aerodynamic as the previous C60. It's a wheelset at home in a wide range of conditions. From time trials to criteriums, on rolling terrain or attempting a personal best, the new C50 is the ideal wheel for spirited road riding. The perfect blend of low weight and aerodynamic performance, the all-new DURA-ACE C50 features an updated all-carbon tubeless rim and new hub design that drops weight while enhancing rigidity. - All-round tubeless wheels with balanced aerodynamics and lightweight materials - 50 mm height full carbon rim - Internal rim width: 21 mm
$1,129.99
The all-rounder of the new DURA-ACE wheel lineup, the C50 is both lighter than the previous C40 model and nearly as aerodynamic as the previous C60. It's a wheelset at home in a wide range of conditions. From time trials to criteriums, on rolling terrain or attempting a personal best, the new C50 is the ideal wheel for spirited road riding. The perfect blend of low weight and aerodynamic performance, the all-new DURA-ACE C50 features an updated all-carbon tubeless rim and new hub design that drops weight while enhancing rigidity. - 50 mm height full carbon rim - Internal rim width: 21 mm - DIRECT ENGAGEMENT - Compatible only with Shimano road 12-speed cassette sprockets
$2,099.99
The all-rounder of the new DURA-ACE wheel lineup, the C50 is both lighter than the previous C40 model and nearly as aerodynamic as the previous C60. It's a wheelset at home in a wide range of conditions. From time trials to criteriums, on rolling terrain or attempting a personal best, the new C50 is the ideal wheel for spirited road riding. The perfect blend of low weight and aerodynamic performance, the all-new DURA-ACE C50 features an updated all-carbon tubeless rim and new hub design that drops weight while enhancing rigidity. - 50 mm height full carbon rim - Internal rim width: 21 mm - DIRECT ENGAGEMENT - Compatible only with Shimano road 12-speed cassette sprockets
$21.95
- Replacement rear wheel skewer. - Specifically designed for use with Saris trainers. - Can be used for both indoor and outdoor rides.
$67.00
Original equipment freehub bodies to fit SRAM hubs and wheels.
$54.00
Our Trainer Axle is designed to adapt your thru-axle equipped bike to on-wheel trainers, such as a 1up, Blackburn, Cyclops, Kinetic, Tacx, Wahoo, and many others. Our goal is to fit the thru-axle to your bike perfectly to minimize spacers and extra parts, providing a clean, high-performance axle for your bike. Train, warm up, and be race ready and fit for the season. - When it’s time for your race or time to head outside, simply remove your bike from the trainer, remove the drive side axle end and go. Our axle is suitable for use on or off the trainer, indoors or out. - The axle shaft and axle ends are precision CNC-machined from 7075 aluminum and hard-anodized for rugged durability. - No special tools required. Design allows for installation or wheel removal using your standard 5mm hex wrench. - Designed, built, and quality tested in the USA. Proven around the world. Important: Before you order, make sure your specific trainer will accommodate the width of your modern thru-axle-equipped bike. Measure your trainer at the widest setting and measure the outside width of your bike frame. Our the trainer axle ends will extend past your frame on each side.
$8.99
Lightweight and easy to install, there are Ritchey rim strips for all wheel sizes and types. - Easily snaps over your rims - Stretchy, tightly woven material provides a close fit and protects from abrasion - Sold as a pair - Not for tubeless set up
$79.00
The best price on the market for a wheel meant to be ridden. Single-wall rims and hubs that come out of the box round and true.
$99.00
Quality Wheels Value Series Disc Front Wheel 29 SRAM 406 6-bolt / Sun SR25 Black
$109.00
Our best value in Quick-release disc wheels.
$5.00
When you can’t even see a part, you might forget about it, but it doesn’t mean its not important. Flat tires are probably the most common bicycle failures. Many times, flats are caused by the rims, specifically the lack of protection from the rims' sharp edges. Good rim strips didn’t exist for BMX rims. They work well and improve the function of any 20 inch rim. If you forget about them, that means they are doing their job.
$9.99 - $139.99
Looking for a super lightweight but badass tubeless sealant? Boom, you've just found it my friend! No Puncture Hassle performs under the most brutal race conditions. The cutting-edge microfiber molecules fill the bigger holes and tears, whilst the advanced latex forms a strong seal instantly. The formula also contains a unique UV detection system that highlights any punctures you haven’t seen during your ride. Developed with the world's top downhillers and pro peloton teams, to give you the finest tire sealant available. It's non-corrosive and easily washes off with water. Compatible with tubeless ready and full UST wheels/tires, No Puncture Hassle works from 15psi-120psi and temperatures from -20°C to +50°C. Our pouch is designed to fit your Presta valve perfectly and is ideal to add to your toolkit or ride pack for emergency top ups on the go! - For Downhill, Enduro and Road tires - Seals tears and holes up to 6mm - Contains UV puncture detection - Won't dry out or ball - Works from 15psi-120psi and temperatures from -20°C to +50°C - Biodegradable
$11.99 - $17.99
The Muc-Off Tubeless Rim tape is made from their proprietary performance material with a pressure-sensitive adhesive to provide just the right amount stretch whilst maintaining durability and strength needed to create a lasting airtight seal. Semi-transparent material makes locating the valve hole easy.
$29.99 - $31.99
V2 Tubeless valves are stronger, lighter, and even easier to use thanks to the machined aircraft grade 7075 aluminum and Muc-Off's new Tire Insert air ?ow system. The new design features six slots that are machined into the base of the valve stem, allows tubeless sealant ?uid and air to ?ow freely, even when running tubeless tire inserts. - 7075 Machined Aluminum valve stem and cap - Tire Insert air flow system keep air moving freely and compatible with most tire foam inserts - 4mm machined Allen Key slot for easy installation and removal - Includes Valve Core Removal Tool (integrated into spare alloy cap) - Supplied with various rubber bases to optimize fit with multiple rim types
$460.00
- Made start to finish in Asheville, NC - Light weight and easy to service - 690 POE feehub for near instantaneous 0.52 degree engagement
$205.00
Replacement freehub kit for Hydra hubs
$6.50 - $6.95
- Strong nylon reinforced PVC for a secure fit - Handles high-pressures; does not rot - 0.5mm thick
$880.00
The SLR 1 Disc WheelSystems are efficient, lightweight, all-around, carbon road wheels that bring premium-level performance to all riders. Featuring hookless rim design and optimized carbon layup to ensure a robust yet lightweight structure, contemporary wider inner width, low friction hubs offering low rolling resistance, and Dynamic Balanced Lacing (DBL) technology to maintain maximum power efficiency, the SLR 1 42 and SLR 1 42 Disc bring outstanding performance at no compromise. - Hookless rim design enhances overall durability and offers a wider inner rim width without adding weight - Optimized carbon layup features high tensile strength carbon fiber placed at the most crucial points to provide stiff, compliant, and lightweight wheels - Low friction hub with precision machined internals eliminates excessive bearing load, reducing bearing friction, lowering rolling resistance, and minimizing power loss - Dynamic Balanced Lacing (DBL) ensures spokes are set for optimal tension when pedaling, resulting in enhanced durability and transmission efficiency - The enlarged DBL hub flange increases spoke bracing angles, boosting overall torsional, transmissional, and lateral stiffness for better power transfer - 42mm-deep all-round rim profile with an updated inner width offers better support for today's higher volume road tires
$480.00
The SLR 2 36 Disc brings the performance gains of a stiff, lightweight carbon wheel to more riders everywhere. Light enough for all-day challenges through the mountains but strong and durable for daily training on variable terrain, the SLR 2 36 Disc’s optimized carbon layup contributes to significant weight reduction for better climbing as Giant hookless technology offers a wide inner rim width for a more confident ride.
$565.00
The SLR 2 36 Disc brings the performance gains of a stiff, lightweight carbon wheel to more riders everywhere. Light enough for all-day challenges through the mountains but strong and durable for daily training on variable terrain, the SLR 2 36 Disc’s optimized carbon layup contributes to significant weight reduction for better climbing as Giant hookless technology offers a wide inner rim width for a more confident ride.
$6.70 - $12.00
- MAX bearings are filled completely with high precision Grade 10 balls for maximum load capacity - No retainer means these bearings have 40 percent more capacity
$1,750.00
ENVE AM30 Carbon Wheelsets use a 30mm inside width rim that is tuned for compliance and damping for performance on All-Mountain, Enduro, and Trail riders. - 30mm internal rim width - Gravity rated impact strength - Rim shape tuned for compliance and damping - Wide Hookless Bead Anti-pinch flat technology
$2,550.00
What It Is A purpose-built XC wheelset without limitations. Light enough to race, strong enough to ride daily. Reduced fatigue and a more compliant ride through shape, laminate, and spoke-hole optimization. Who It's For Modern XC racers and riders who demand equal uphill and downhill performance, light weight, durability, and vertical compliance for long hours in the saddle. Why We Made It Carbon fiber is responsible for unlocking the potential of bigger and wider tires on mountain bikes. Today, riders can improve comfort, efficiency, and control by adapting their mountain bikes perfectly for the terrain and trails. Undoubtedly, this means they can go further and faster with more confidence. Complement increased tire volumes and rim widths with a modern XC tread, and you've got an effective system, maximized for the variable-pitch trail. The result is a purpose-built full-carbon fiber XC wheelset that is lighter, wider, and more vertically compliant without sacrificing strength or reliability. Additionally, the M525 features ENVE's patent pending, wide hookless beads that improve pinch flat resistance and allow riders to run modern lightweight XC tires with a reduced risk of pinch flatting or impact damage.
$2,550.00
What It Is The definitive mountain wheel. The M6 Series defines the modern and varied interpretation of the mountain bike. Loaded with traction and acceleration on the climb, it's also backed with precision and control while absorbing vibrations and impacts on the descent. The M6 Series is designed in two diameters and three widths to ensure your sophisticated preference for tire size and pressure is met with an uncompromising tire-to-rim interface. Who It's For The mountain biker who wonders what is possible, the skeptic afraid of "plastic" wheels, the weight weenie, the Clydesdale, the high-mileage guy, the weekend warrior. It would be easier to describe who it is not for… Why We Made It ENVE showed the world that a mountain bike wheel could be carbon — we're still immensely proud of that achievement. A mountain bike wheel, however, can be so much more. The M6 Series is not about technical challenges, and we refuse to chase specifications in order to be the widest, tallest, or stiffest. For the M6 Series of wheels, the question was not about carbon, rather, "What is the potential of a mountain bike wheel?" Each M6 Series wheel model is designed for the broad range of tire widths, hub configurations, and sizes so that you, the modern trail rider, can choose between them.
$9.95
A non-tubeless protective strip to cover the spoke holes in your ENVE carbon clinchers. 
$299.00
The DT Swiss 240s MTB Center Lock Front Hub hits the sweet spot between low weight and reliability. With multiple axle options and 6-bolt rotor adapters for the Center Lock spline, you can build up a high-end wheel for nearly any bike. On the winning end of countless World Cups and local races in every discipline from XC to enduro to downhill, these hubs are the centerpiece for thousands of nearly frictionless rides.
Page 1 of 6 Next page